BCHCQ - V39042,SATIN,URETHANE VARNISH
- MSDS: BCHCQ
- Manufacturer: THE VALSPAR CORP
- Product Name: V39042,SATIN,URETHANE VARNISH
- National Stock Number: 8010-00N001138
Product Identification
Product ID:V39042,SATIN,URETHANE VARNISH
MSDS Date:01/01/1985
FSC:8010
NIIN:00N001138
MSDS Number: BCHCQ
Responsible Party
MINNEAPOLIS, MN 55415-1211
US
Emergency Phone: 612-332-7371
Info Phone: 612-332-7371
Cage: GO944
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
SILICA (TYPE NOT SPECIFIED)
Fraction By Weight: 5.1%
SOYA MODIFIED POLYURETHANE RESIN (TYPE 1)
Fraction By Weight: 38.6%
RULE 66 MINERAL SPIRITS (ALIPHATIC HYDROCARBONS)
Fraction By Weight: 52%
GLYCOL ETHERS
CAS: 111-46-6
RTECS: ID5950000
Fraction By Weight: 2%
AROMATIC HYDROCARBONS
Fraction By Weight: 1.8%
Hazards
Effects of Overexposure:SKIN/EYE: IRRITATION. INHALATION:
ANESTHETIC,IRRIT RESP TRACT,CNS DEPRESS,HEADACHE,DIZZY,COMA,NAUSEA
First Aid
First Aid:EYE:FLUSH WITH WATER 15 MIN,NOTIFY PHYSICIAN. SKIN: WASH WITH
SOAP AND WATER,APPLY SKIN CREAM. INHALATION: REMOVE FROM
EXPOSURE,RESTORE BREATHING,NOTIFY PHYSICIAN.
Fire Fighting
Flash Point:103F/39C
Lower Limits:0.7
Extinguishing Media:WATER SPRAY,CO2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONT BREATH APP
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
PRESSURE BUILD-UP WHEN EXPOSED TO HEAT OR FLAME
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION,FLAMES,HOT
SURFACES & ELECTRICAL STATIC OR FRICTIONAL SPARKS. AVOID BREATHING
VAPORS,VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND NON-SPARKING
TOOLS
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORAGE
BUILDING DESIGN CONFORM TO REQUIREMENTS OF NFPA CLASS 1A LIQUIDS.
Other Precautions:DO NOT USE NEAR OPEN FLAME,TAKE INTERNALLY OR BREATH
VAPORS. CLOSE CONTAINER AFTER EACH USE
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/MECHANICAL,USE EXPLOSION PROOF MOTORS.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASS/GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
ADD:INGRED: ADDITIVES 0.3% AND DRIERS 0.2%
Chemical Properties
Boiling Pt:B.P. Text:280F/137C
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:62.5
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT,SPARKS & OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE,FROM THERMAL DECOMP
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE TO LOCAL,STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.